chipw
Asphalt Lover
Posts: 27
|
Post by chipw on Jul 14, 2007 21:39:40 GMT -5
Replaced the stock bumpers with these custom made babys I got for 50 bucks! Next will be to see if the Ranger wheels/tires will fit on the Cherokee, hopefully, some say they should. I'm hopin'! (OK, so the thumbnail images aren't working for some reason, they do link correctly though). (Weird, when I hit the refresh button the thumbnails flash then disappear to the broken image icon) (hehe, more weird, when I preview the message for editing the thumbnails appear just fine)
|
|
|
Post by K5 on Jul 14, 2007 23:25:09 GMT -5
Sweet man! I hope you don't mind but I modified your post so the pics would show. I can't figure out why the thumbnails wouldn't work. They showed up fine in the preview. It could be a conflict with one of the codes I use on the forum. I'll keep messing with it.
|
|
chipw
Asphalt Lover
Posts: 27
|
Post by chipw on Jul 15, 2007 0:47:40 GMT -5
So, looking at that front end, behind the bumper, is there something that can be done to clean that up?
|
|
|
Post by rstep on Jul 16, 2007 6:56:55 GMT -5
Good looking bumpers,you could try some 1/8 th inch filler plates to clean that area up.
|
|
|
Post by lonnie on Jul 16, 2007 23:06:25 GMT -5
Next will be to see if the Ranger wheels/tires will fit on the Cherokee, hopefully, some say they should. I'm hopin'!
You should be OK the Jeep and small Ford are both 5 on 4.5, so the lugs will line up. You might want to check the backspacing on the wheels to make sure they don't rub while turning or flexing. A 3.75" or greater backspacing should be OK , any less and they will rub.
|
|