|
Post by K5 on Mar 15, 2007 0:15:57 GMT -5
Went and picked up a full float corporate 14 bolt tonight for the blazer. As long as the guy knew what he was talking about it also has 4.10 gears already installed. I still have to pull the diff cover and go through it to make sure everything is good to go. Picked it up for 75 bucks ;D. And oh, ya, they weren't kidding when they say it weighs 350 pounds
|
|
|
Post by trebor on Mar 15, 2007 0:29:30 GMT -5
Went and picked up a full float corporate 14 bolt tonight for the blazer. As long as the guy knew what he was talking about it also has 4.10 gears already installed. I still have to pull the diff cover and go through it to make sure everything is good to go. Picked it up for 75 bucks ;D. And oh, ya, they weren't kidding when they say it weighs 350 pounds Awsome klye.best axle to get for a k5.that was giving it away for 75
|
|
|
Post by rstep on Mar 15, 2007 10:11:40 GMT -5
Great deal Kyle,good luck with the swap.
|
|
|
Post by cloneofthemean on Mar 15, 2007 11:17:11 GMT -5
Nice grab!. If you want help doing the swap give me a shout. I'm busy as hell right now but I can make some time. I used to have the # for the u joint conversion. Get a hold of blublaz, I know he has it. I also have a plasma cutter if you haven't done the shackle flip yet.
Jim
|
|
|
Post by ecameron87 on Mar 15, 2007 11:17:12 GMT -5
What are you going to do for the front axle?
|
|
|
Post by trebor on Mar 15, 2007 11:22:35 GMT -5
Nice grab!. If you want help doing the swap give me a shout. I'm busy as hell right now but I can make some time. I used to have the # for the u joint conversion. Get a hold of blublaz, I know he has it. I also have a plasma cutter if you haven't done the shackle flip yet. Jim the conversion joint is a 1310 to a 1310/1350.you can get them at napa or a driveline shop
|
|
|
Post by rstep on Mar 15, 2007 11:37:46 GMT -5
You can always go up to the 1410 joint.
|
|
zj95
Tail Gunner
Im not arrogant...... Im just better than you...
Posts: 276
|
Post by zj95 on Mar 15, 2007 11:59:17 GMT -5
congrats kyle...
that should help u next time u decide to drive off a cliff.....
|
|
|
Post by K5 on Mar 15, 2007 12:01:27 GMT -5
What are you going to do for the front axle? shootin for a dana 60
|
|
|
Post by trebor on Mar 15, 2007 12:21:58 GMT -5
Yuo can always go up to the 1410 joint. \ ya thats the best way to go but not the cheapest.all the requried parts are way into the hundreds.but he is going for a dana 60 so he must have money lol.My whole blazer is not worth the price of a dana 60.
|
|
|
Post by rstep on Mar 15, 2007 12:30:10 GMT -5
A d60 is the way,finding one cheap is the hard part.
|
|
|
Post by slick1100 on Mar 15, 2007 13:19:51 GMT -5
cool find! So when do the BIG tires come?! ;D
|
|
|
Post by K5 on Mar 15, 2007 14:01:23 GMT -5
cool find! So when do the BIG tires come?! ;D sometime this summer hopefully. planning on running 37's.
|
|
|
Post by trebor on Mar 15, 2007 14:31:10 GMT -5
cool find! So when do the BIG tires come?! ;D sometime this summer hopefully. planning on running 37's. Cool our rigs will have the same axle and tire size.Do you plan to do a 8 lug conversion on the 10b until the Dana 60 comes in?.I hope to start mine after a house we are working on sells.
|
|
|
Post by K5 on Mar 15, 2007 15:26:32 GMT -5
I plan on swapping the 60 and the 14 at the same time unless something happens to the 12 bolt.
|
|