|
Post by 99frontierxe on Jul 27, 2006 0:20:20 GMT -5
Hey guys, I am gonna be out in the garage workin on my truck Saturday. I am doing some electrical work, maybe fabbing a couple of brackets, etc. I will hopefully have a new drill press...already have a MIG welder and grinders, etc... If you have a couple of nagging projects you've been wanting to do, then come over I will be out there pretty much all day, after 10am. Come on out, hang out, enjoy the 2* cooler weather than tucson, lol, and have a couple of beers. I am at Duval Mine Rd, and I-19. PM me for my address, and further instruction. Hope to meet some of you
|
|
|
Post by slick1100 on Jul 27, 2006 12:53:55 GMT -5
I've got a few projects to take on Saturday too on both my bike and my truck. If I get done early enough I may take the truck for a spin and swing by.
|
|
|
Post by 99frontierxe on Jul 27, 2006 17:22:01 GMT -5
Cool...maybe I'll see ya.
Cell # 520-331-2254.
|
|
|
Post by Archangel on Jul 27, 2006 20:50:15 GMT -5
Hell, if you guys get done with all of that...I'll be at my house installing Dragon51's new axles, repairing ZJeeps rear trackbar bracket and showing one of Dragon 51's friends from another board how to tear down a d30 and remove the hubs.
And, on top of that....I'll be trying to clean out my Jeep and figure out how I am going to proceed with my spare tire carrier.
|
|
|
Post by 99frontierxe on Jul 27, 2006 21:51:08 GMT -5
Haha, sounds like you will be more busy than me, lol. My buddy might be bringing his cherokee down from Phoenix... It has a long arm suspension lift from Rusty's offroad, 33s, custom sliders that I built.Maybe we can do a quick local run on Sunday? Something nearby, but fun enough to flex out and use sliders
|
|
|
Post by Archangel on Jul 27, 2006 22:36:09 GMT -5
Haha, sounds like you will be more busy than me, lol. My buddy might be bringing his cherokee down from Phoenix... It has a long arm suspension lift from Rusty's offroad, 33s, custom sliders that I built.Maybe we can do a quick local run on Sunday? Something nearby, but fun enough to flex out and use sliders It would have to be on Sunday evening, but maybe a quick run out to Reddington or something...hell, if you want mud, the wash (off road legal) behind my house has got a foot of water in it... ;D
|
|
|
Post by 99frontierxe on Jul 27, 2006 23:10:56 GMT -5
If I get all my lights wired in, haha, I may be down.
|
|
|
Post by K5 on Jul 27, 2006 23:33:12 GMT -5
I may stop by. Have to see when my study group for school is meeting.
|
|
|
Post by tred on Jul 28, 2006 1:18:28 GMT -5
Man, I guess I should start a board and call it Prescott Offroad, because you dudes make me feel frustrated. I can never get a hand with my fab work. Chit, I would willing to make all kinds of stuff for folks if I had some help.
|
|
|
Post by 99frontierxe on Jul 28, 2006 2:11:19 GMT -5
Come down here, I will help ya, lol
|
|
|
Post by dragon51 on Jul 28, 2006 3:35:59 GMT -5
I know for one I am looking forward to this learning experence ;D
|
|
|
Post by rstep on Jul 28, 2006 7:52:12 GMT -5
Wow there's some work going this weekend,momma's got to work so I have daddy duty but I'll try and swing threw after 2.
|
|
|
Post by Archangel on Jul 28, 2006 9:16:31 GMT -5
Man, I guess I should start a board and call it Prescott Offroad, because you dudes make me feel frustrated. I can never get a hand with my fab work. Chit, I would willing to make all kinds of stuff for folks if I had some help. Bring it on down...I'll help
|
|
|
Post by 99frontierxe on Jul 28, 2006 12:47:19 GMT -5
Cool, I hope to meet some of you guys! I do need to go to Harbor Freight in the morning... they have a drill press that I want, Addy: 1040 W Camino Hombre Viejo Sahuarita, Az 85629 Cell: 520-331-2254 General directions to my house... I-19 and Duval Mine Rd (exit 69...cool, huh?) - Turn right at exit, go west till La Canada, make a right.
- Go north for approx 1.5 miles... you will see a cemetary on your right. I am the second right after the cemetery, there is a "right turn only" lane. You will see a sign for the community "Santo Tomas Villas." This street is called Camino Sueno de Sahuarita.
- Follow this street until it comes to a T-Intersection. Make a right.
- Go over the brigde, and you will immediately come to another T. Make a left... This street is Camino Hombre Viejo.
- Follow the road until you almost hit the end of the street. My house is 1040... 4 houses from the end of the street, on the north side. The garage door will be open, tunes playin, and wrenches droppin...
|
|
|
Post by mongosd2 on Jul 28, 2006 19:42:39 GMT -5
I'm also working Saturday on my D2's roll cage...Ft Lowell and Tucson blvd...
|
|
|
Post by 99frontierxe on Jul 29, 2006 12:40:02 GMT -5
Woo hoo... just got back from Harbor Frieght... 300 bux later, new floor standing drill press, and 6" benchtop grinder. yay! Now setting everything up... loving the rain I have my c-phone in the garage if anyone still wants to stop by.
|
|
|
Post by K5 on Jul 29, 2006 14:57:06 GMT -5
I'm not gonna be able to make it. Hopefully I'll see you guys at the Gunsite run.
|
|
|
Post by yotamaster on Jul 29, 2006 15:45:16 GMT -5
I'd be down but I've got to take care of the misses. Sorry.
|
|
|
Post by 99frontierxe on Jul 29, 2006 18:30:40 GMT -5
Its all good... Scott came by for a bit, but things were kinda slow moving.
I got a late start, due to some issues with the drill press, but its all good now. I had to fabricate light mounts, as well as a switching panel, and that took much longer than anticipated... I now have all 4 130Watt lights mounted, and two of the rocklights. Just need to mount the other two in the back, and wire it all up... working on the switch panel now.
|
|
|
Post by slick1100 on Jul 29, 2006 21:13:14 GMT -5
Sorry I didn't make it. The rain first thing this morning discouraged me from doing any work of any kind and instead going down to Bisbee to tour the mine and stuff. I will be at the Patagonia run on the 5th for sure!
|
|