zj95
Tail Gunner
Im not arrogant...... Im just better than you...
Posts: 276
|
Post by zj95 on Oct 16, 2006 11:44:43 GMT -5
ok im going to swap ou my mechanical fan for a electric one. i will be using a 90-95 ford tarus fan and a temp controller. the taurus fan has 2 speeds, high and low, and i want to wire both. im going to run a hayden temp controler and i made a little diagram to help. does anyone see any problem with this? the hayden unit has a 30 amp relay built in and is suppose to be enough for low but u need 40-50 amps for high.
|
|
|
Post by zjeep on Oct 16, 2006 21:43:29 GMT -5
Like the drawing, looks alright to me, but should probably get someone elses opinion.
|
|
adam728
Asphalt Lover
What's with all these rocks?
Posts: 47
|
Post by adam728 on Oct 17, 2006 7:22:56 GMT -5
Here's what the S-10 guys do to wire both speeds when swapping in a Taurus fan.
|
|
|
Post by rstep on Oct 17, 2006 8:05:29 GMT -5
Looking at the drawing ,seems to be right.
|
|
|
Post by zulu on Oct 17, 2006 20:02:54 GMT -5
Just make sure your alt and battery can handle the extra power draw.
|
|